How ShearGenius Scissors Are Made — Who Does What
ShearGenius scissors are designed by Matt Grumley, a hairdresser behind the chair since 1990 and the scissorsmith who founded ShearGenius in 2007. Each model is made to Matt’s specification from Japanese steel by a partner workshop, then hand-finished, tensioned and inspected at Matt’s bench in Victoria. We publish the steel and the Rockwell hardness (HRC) of every model.
Who does what
Here is each stage of a ShearGenius scissor, and who is responsible for it.
Design: Matt Grumley

Matt designs every model in the range. ShearGenius sells only its own named ranges, such as the Prodigy, Apex, Diamond, Emperor, Firebird, Geisha and Young Genius. We are not a reseller of other brands.
Steel: Japanese
In Matt’s words: “We source our steel from the best steel manufacturer in Japan, and it is forged.”
The grade is not the same on every model. Depending on the model, it is Cobalt Alloy, ATS-314, Forged ATS-314 or VG10, and the table below lists them model by model (all but the Rose Tattoo thinner, whose steel we are re-confirming).
Making: a partner workshop we don’t name
Each scissor is made to Matt’s specification by a partner workshop. We don’t name the workshop. If we named it, any other scissor company could contact it and have the same quality made. Keeping it private stops Matt’s designs being copied.
We don’t forge the steel ourselves, and we don’t claim to.
Machining: six brand-new CNC machines
Second only to the steel is how the scissor is machined. Our partner workshop runs six brand-new CNC machines, each worth more than five million dollars, and every part of a ShearGenius scissor is cut on them. In Matt’s words: “Most factories are lucky to have one CNC machine to drill the hole.”
CNC machining is what makes every pair consistent: each part is cut to the same programmed dimensions, pair after pair, so the scissor that reaches Matt’s bench starts out true.
Heat treatment: world-class
The best steel in the world is wasted if the heat treatment isn’t right. Heat treatment is what turns a steel’s potential into hardness, and hardness is what holds an edge. In Matt’s words: “Our heat treatment is second to none. It is world-class.”
You can see the result in the figures we publish for every model: 58 HRC on the Cobalt Alloy models, 58–60 HRC on the ATS-314 models, 60 HRC on the VG10 Rose Tattoo scissor and 60–62 HRC on the Forged ATS-314 Prodigy and Goldie scissors.
Hand-finishing, tensioning and inspection: Matt, at his bench in Victoria
Every scissor we sell is hand-finished, tensioned and inspected at Matt’s bench in Victoria before it ships. Each pair goes under the loupe for its pivot, its edge and its tip alignment. No batch is passed on trust.
What Matt does not do is sharpen every new scissor. New scissors arrive from the partner workshop with their edge already on, and Matt’s job at the bench is to finish, tension and check them.
Hardness: published for every model
Every ShearGenius scissor and thinner lists its steel and its Rockwell hardness, written as HRC, on its product page. The table below lists them model by model, except the Rose Tattoo thinner, whose steel we are re-confirming before we list it here.
Sharpening: a paid service, on the road

Sharpening is a separate, paid service for scissors you already own, whatever the brand. Our mobile workshop comes to your salon across Victoria and Tasmania, plus Mount Gambier and Millicent, and your scissors are sharpened and back in your hands the same visit. There is no mail-in service. Sharpening is not included with a new scissor.
Warranty: the Lifetime Manufacturing Warranty
ShearGenius scissors are covered by the Lifetime Manufacturing Warranty: cover for life against manufacturing defects in materials and workmanship. It does not cover ordinary edge wear, sharpening or servicing, accidental damage or drops, misuse or neglect, corrosion or chemical damage, or unauthorised modifications. Having your scissors sharpened elsewhere does not by itself cancel cover for an unrelated manufacturing defect, but damage caused by that sharpening is not covered.
Steel and hardness by model
Taken from each model’s product page on 19 November 2026.
| Model | Steel | Hardness (HRC) |
|---|---|---|
| Prodigy scissor | Forged ATS-314 | 60–62 HRC |
| Goldie scissor | Forged ATS-314 | 60–62 HRC |
| Rose Tattoo scissor | VG10 | 60 HRC |
| Apex scissor and texturiser | ATS-314 | 58–60 HRC |
| Cosmos scissor | ATS-314 | 58–60 HRC |
| Diamond scissor | ATS-314 | 58–60 HRC |
| Elite scissor and thinners | ATS-314 | 58–60 HRC |
| Vixens scissor | ATS-314 | 58–60 HRC |
| Diamond texturiser | Cobalt Alloy | 58 HRC |
| Prodigy texturiser | Cobalt Alloy | 58 HRC |
| Emperor scissor and thinners | Cobalt Alloy | 58 HRC |
| Firebird scissor, thinners and channeller/texturiser | Cobalt Alloy | 58 HRC |
| Geisha scissor and thinner | Cobalt Alloy | 58 HRC |
| Geisha Left-Handed scissor and thinners | Cobalt Alloy | 58 HRC |
| Grace scissor | Cobalt Alloy | 58 HRC |
| Jada scissor and Jada 35 thinners | Cobalt Alloy | 58 HRC |
| Phoenix barber shears | Cobalt Alloy | 58 HRC |
| Slider scissor | Cobalt Alloy | 58 HRC |
| Swivel scissor | VG10 | 60 HRC |
| Young Genius scissor and thinner | Cobalt Alloy | 58 HRC |
| Young Genius Left-Handed scissor and thinner | Cobalt Alloy | 58 HRC |
| Dracula 10 channeller | Cobalt Alloy | 58 HRC |
| Vampire 26 texturiser | Cobalt Alloy | 58 HRC |
| Vampire 35 thinner | Cobalt Alloy | 58 HRC |
Hardness: what other brands publish
Hardness, the Rockwell C figure, is where heat treatment meets edge life. On 19 November 2026 we checked what the brands below, all sold in Australia, publish. On the pages we checked, Jaguar was the only one of these brands to give hardness figures; the others gave none for any model.
- Kasho: none of the 32 products on its Australian store.
- Yasaka: none on its own product pages, and its material page names the steels without a hardness.
- Joewell: no number on its own specification page, and none on the 109 listings at its official Australian distributor. Joewell says its hardness is “15% higher” than competitors’ but gives no figure to check that against.
- Jaguar: its quality page names no steel grade, but its product pages give a hardness figure: 54 HRC on the entry Pre Style line, 58 HRC on most others and 59 HRC on the Black Line and Kamiyu (as at 19 November 2026).
- Mizutani: its global site names its alloys but gives no hardness.
- Matsui and Scissor Tech: none of 314 Matsui products and none of 442 Scissor Tech products.
- Osaka: none of its 72 scissors and sets.
- Excellent Edges: none of its 60 scissors and texturisers.
Every ShearGenius scissor and thinner in the current range shows its steel and hardness on its product page.
Questions about how ShearGenius scissors are made
Does ShearGenius make its own scissors?
ShearGenius designs and finishes its own scissors. Matt Grumley designs every model, a partner workshop makes each one to his specification from Japanese steel, and Matt hand-finishes, tensions and inspects every pair at his bench in Victoria. We don’t forge the steel ourselves, and we sell only our own ranges.
Why don’t you name your factory?
Because any other scissor company could contact it and have the same quality made. Keeping the partner workshop private stops Matt’s designs being copied.
Where does the steel come from?
Japan. In Matt’s words: “We source our steel from the best steel manufacturer in Japan, and it is forged.” The grade depends on the model: Cobalt Alloy, ATS-314, Forged ATS-314 or VG10.
How are ShearGenius scissors machined and heat-treated?
Every part of a ShearGenius scissor is cut on six brand-new CNC machines at our partner workshop, each worth more than five million dollars. Matt describes the heat treatment as “second to none… world-class”, and the hardness it produces is published for every model.
Does Matt sharpen every scissor ShearGenius sells?
No. Matt hand-finishes, tensions and inspects every scissor we sell, but new scissors arrive from the partner workshop with their edge already on, so he does not sharpen every one. Sharpening is a separate, paid service for scissors you already own.
Do you publish the hardness of your scissors?
Yes. Every ShearGenius scissor and thinner lists its steel and Rockwell hardness on its product page: 58 HRC on the Cobalt Alloy models, 58–60 HRC on the ATS-314 models, 60 HRC on the VG10 Rose Tattoo scissor and 60–62 HRC on the Forged ATS-314 Prodigy and Goldie scissors.
Is sharpening included when I buy a new scissor?
No. Sharpening is a paid service, done on the road at your salon across Victoria and Tasmania, plus Mount Gambier and Millicent. There is no mail-in service.
What does the warranty cover?
The Lifetime Manufacturing Warranty covers manufacturing defects in materials and workmanship for the life of the scissor. It does not cover ordinary edge wear, sharpening or servicing, accidental damage or drops, misuse or neglect, corrosion or chemical damage, or unauthorised modifications.
Matt Grumley — Hairdresser & Scissorsmith, ShearGenius, Victoria